|
Plumbing |
|
|
Updated
05/03/2008 05:07 PM Holding TanksOur custom designed tanks truly fit
MCI's more accurately
than any other holding tank out there.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Sure flow has introduced a new computerized
Pump .. Outs out more power and also keeps up with
your demand . The pump runs slow for slow demand then runs very fast for more
demand .
So no more on off - on off constant cycling.
Holding tank leaks ...
Spin-On vs. Glued or Screwed-In Fittings
|
Our Spin on type |
|
Replaces vents cut through the roof ..
Pro Vent. Manufactured housing and
RV's only; automatic anti-siphon trap vent used as secondary venting.
Simply hand tighten, no thread seal needed. Must be installed in accessible
location with free flow air; do not install in sealed wall cavity. 1-1/2" MPT
threads.
If home depot doesn't have it any
Mobile home supply depot will have it ..
This system only works if you have plastic hose already vented through the
bottom of your bus pointing rearward to create a siphon under the bus floor..
This is a subject not talked about in a great deal. The RV industry has come a long way from the small cold plastic toilet to the new modern full sized china toilet. The biggest difference is that these toilets are extremely efficient with flush water. There are several companies now making these fine china toilets, such as Sealand, Jabsco, and Microphor.
| Why China is Better than Plastic |
| ADVANTAGE
1: CHINA RESISTS STAINING Because of its vitreous (glass-like) surface, china fixtures resist staining and keep their luster. Plastic stains more easily, and the stains often cannot be removed. |
|
 CHINA |
 PLASTIC |
|
ADVANTAGE 2: CHINA RESISTS SCRATCHES China can be cleaned with abrasives without getting scratched. Plastic will scratch with abrasive cleansers, causing it to look worn and old. |
|
 CHINA |
 PLASTIC |
Over the years we've found that Neo-Angle showers are the most efficient use of tight space.
Over the years, technology has advanced in everything, including simple plumbing. The latest advance in technology is using flexible plumbing lines without elbows that can freeze and not to have any types of connections in your walls. High end homes nowadays are built with a manifold system in the basement, where your hot and cold water come to a distribution box, similar to an electrical circuit breaker. From this manifold system, each line is flexible similar to a garden hose. The piping goes from the manifold to the fixture without any elbows or other connections. Below are images of a manifold and an example of a Hydronic heating floor system that's also available in our bus conversions.
|
|
|
|
 |
|
Manibloc Manifold System |
Manifold System |
Copper Manifold |
Hydronic Floor Heating |
PEX is an acronym for cross-linked polyethylene. The "PE" refers to the raw material used to make PEX (Polyethylene), and the "X" refers to the cross-linking of the polyethylene across its molecular chains. The molecular chains are linked into a three-dimensional network that makes PEX remarkably durable within a wide range of temperatures, pressures and chemicals.
There are several different methods used to cross-link polyethylene. It is important to distinguish between the various methods of cross-linking and the PEX products that result. A distinction should be made between PEX produced above the polyethylene crystalline melting temperature, and PEX produced below that temperature. Simply stated, there is a difference between PEX that is cross-linked during extrusion and PEX tubing that is cross-linked in a post-extrusion process.
Because of its -20°F and extreme high heat acceptance, this is type of plumbing tubing we have found to be the best.
"See our new Online RV Catalog "
www.BusRVparts.com
Need
help?,...Call our ...
Free Advice Hotline
610-767-8000
| Electrical | Flexsteel | Generators | Inverters | Plumbing | Satellite TV | Rear Cap A/C | |
| Party Buses |
|
Contact Information:
|
Extreme-Smart-Sensor-5.7.jpg)
